Warmlyyours Snow Melt & Slab Heat Cable Repair Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Warmlyyours Snow Melt & Slab Heat Cable Repair herunter. WarmlyYours Snow Melt & Slab Heat Cable Repair User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Items needed:
1) A Splice Kit 2) Tools
GROUND SHIELD F .P INSULATION
SHEATHING
CONDUCTOR CORE
Crimping toolWire strippers
1 - .40 x 6” Heavy Wall,
Adhesive-Lined
Heat Shrink Tube
FASTENAL
P/N: 58654
1 - 16-14AWG
Uninsulated
Butt Connector
RadioShack
P/N: 64-3036
2 - 20 - 18 AWG
Sealed
Crimp + Solder
Connectors
FASTENAL
P/N: 0710573
Step 1 - Determine where the damage is and make a clean cut
through the wire.
Damaged Area
Cut
Step 2 - Using wire strippers, strip 1” of the outer insulation
from both cables.
Inner Core
Ground Shield
Sheathing
Step 3 - Separate the braided sheath wire from the inner
layer of insulation.
a.
b.
Step 4 - Shorten one inner conductor wire of both the cables
to 1/2”.
1
2”
/
Cut
Step 5 - Place heat shrink lube over one side of the cable & then insert the
inner conductor wires into each side of the crimp on connector.
.40 heat shrink tube
Step 6 - Compress the crimp on the crimp solder connector on each side using
crimp tool. Using a butane torch, carefully heat crimp connectors to seal
crimp and melt solder. Do not overheat connector as damage may result.
Heat Connector with Butane Torch
Step 7 - Insert both Ground leads into the uninsulated crimp connector
and crimp.
Step 8 - Slide the heat shrink tube over the complete joint and shrink it with
a hot air pistol. Do not use a naked flame.
Hot air pistolButane Torch
10259-A 8/2011
EFFECTIVE: August, 2011
Instructions For Snow Melt & Slab Heat
Cable Repair
Free Design Service • 24/7 Installation Support • No Nonsense™ Warranty •(800) 875-5285 • www.WarmlyYours.com
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - Cable Repair

Items needed:1) A Splice Kit 2) ToolsGROUND SHIELD F .P INSULATIONSHEATHINGCONDUCTOR CORECrimping toolWire strippers1 - .40 x 6” Heavy Wall, Adhes

Kommentare zu diesen Handbüchern

Keine Kommentare